Interior and Exterior Painting & Power Washing Contractor in Monroe

The homeowner wants to keep the same color but refresh the house. Some of the fascia is in disrepair and will need to be replaced.
Solution: MDF will soft wash the exterior of the home, as well as sand and spot-prime the troubled areas. Our carpenter will replace rotted fascia and give the home new life and great curb appeal with a new coat of solid stain.

This homeowner is in need of a paint color change to the exterior of their home, along with some prep work that needs to be done. MDF will soft wash the entire exterior of the home. We will then start our prep work, which includes sanding and scraping all loose paint and cracks. Then, we will spot prime all bare wood areas with a slow drying oil primer to ensure proper adhesion when applying the finish coat of paint/stain, including all facia boards, soffits, and shutters in a select few doors frames, window frames as well as garage door frames. Also, a few holes created by the carpenter beast will be filled with wood putty and painted/stained over.

This homeowner hasn’t had a professional paint job in 15 years. There is an extensive amount of peeling and chipping throughout the exterior siding of the home, including all window trim and soffits. MDF will soft wash the entire exterior of the home. We will take a generous amount of time sanding and scraping away all loose and chipped paint. Then, we will spot prime all bare wood areas with a slow drying oil primer to assure proper adhesion when applying are finish coat to all siding, corner boards, fascia boards, soffits, window trim, and all door trim.

This homeowner had not had a professional paint job in over 10 years. They have a fireplace that has been allowing soot to gather in areas of the ceiling and the walls. MDF will come and prep all nail pops, and small cracks and clean off all soot from the walls. We will wet sand the prepped areas and then paint the walls with 1 coat of Benjamin Moore ultra high premium product. We will also paint the kitchen and den ceilings with flat white ceiling paint!

Bill from Monroe, CT called MDF for interior painting. His home was in need of a refresh. Our team began by placing plastic protective coverings over the furniture. Then, we applied primer to the walls. Finally, we added a fresh coat of paint to the walls, which created a smooth and modern atmosphere. Bill was very pleased with the outcome, great job team!

MDF Painting and Power Washing revived a home in Monroe, CT. The customers wanted to improve the curb appeal of the home and create a better atmosphere. First, our team pressure-washed the exterior siding because there was dirt on the surface. Then, we painted the exterior a light shade of brown. We also touched up the front pillars and trimming. The customers were very happy with the result!

Customers from Monroe, CT called MDF for power washing services on their backyard patio. The patio was covered in dirt and also had mold and mildew buildup in the cracks. Our team spent the day pressure washing the area. We eliminated all dirt, mold, and mildew. Now, the surface is clean, and the customers are thrilled!

Eric called MDF to wash the exterior of his Monroe, CT home and stain his deck. In addition to these requests he also asked that we repair the siding from the front and back of his home.

For the exterior of the home our crew applied a solution and soft washed it, they also soft washed the deck, Bilco doors. And for the gutters we added more solution to make sure they get thoroughly cleaned. For the trims we sanded and applied a coat if oil-based primer on all the bare wood when the primer was dried, we then applied a coat of full coverage of Sherwin Williams Exterior Emerald, Satin paint in the shade of white. On the deck we stained all he rails, posts, stringers, risers, support posts and the fascia. As for the bilco doors they were sanded and applied a DTM rust inhibitor then applied a coat of full coverage DTM paint in the shade of CC490. The garage stairs were also stained to match the existing color, which was Sherwin Williams Solid Stain, SW 3064.

     Eric G. called MDF Painting to update his exterior after receiving a flyer in the mail. After meeting with a Paint Care Consultant, he decided to repair spots on his deck and home before painting everything. MDF was happy to help with his carpentry and painting needs.
     Power wash technicians soft washed the home, deck, and Bilco door to prepare for new paint. They applied a cleaning solution to kill any mildew or dirt before sanding. The carpentry work included replacing pieces of his siding, fascia, deck rails, and trim pieces all over the property. Since the siding was wood, painters measured the moisture levels before adding an oil-based primer. The Blico door needed a direct-to-metal (DTM) rust inhibitor and paint products. Painters custom color-matched everything. Eric loved the results and the professionalism of our employees!